User Tools

Site Tools


hooking_up

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

hooking_up [2018/09/12 20:25] (current)
Line 1: Line 1:
 +Towing Safety Checklist
 +
 +Inspect the trailer for loose bolts and worn parts. Tighten loose bolts and replace worn parts before hooking up. If you have bolts that are consistently coming loose, use Loctite or put on a double nut to keep them tight.
 +
 +During hook up:
 +
 +  * Correct size trailer ball in use
 +  * Trailer ball tightly secured to the ball mount
 +  * Ball mount pinned securely to the receiver
 +  * Trailer coupled all the way on the ball
 +  * Trailer coupler release latched down
 +  * Trailer jack retracted or removed
 +  * Trailer wiring harness connected to the vehicle
 +  * Safety chains crossed and hooked from the underside
 +  * Weight distributing hitch spring bars forms attached to the hitch
 +  * Weight distributing hitch spring bars tension set correctly
 +  * Breakaway switch cable securely attached to the vehicle
 +  * All trailer lights - running, brake, turn signals working
 +  * Trailer brake controller working and adjusted correctly
 +
 +Each time you stop, check the hitch and cables to make sure they are still properly attached. Check the tires of the trailer to make sure they are not going flat. Check the wheels to make sure they are not hot to the touch. If the wheels are hot, it may indicate a brake or bearing problem.
 +
 +Each day before you start check the lights to make sure they are working properly.
 +Between trips clean the hitch and cables to keep them in good shape. ​
 +
 +Never let yourself be interrupted when hooking up. Keep your mind on your work.
  
hooking_up.txt ยท Last modified: 2018/09/12 20:25 (external edit)